1
/
of
1
Grace Scientific Corporation
GSC-EE-50 - Electronic Workstation with Instrument Panel
GSC-EE-50 - Electronic Workstation with Instrument Panel
Regular price
Rs. 0.00 INR
Regular price
Sale price
Rs. 0.00 INR
Taxes included.
Shipping calculated at checkout.
Dispatch Lead Time:
Quantity
Couldn't load pickup availability
Specifications:-
1.General Requirements
•Integrated electronics workbench with working table and instrument panel.
•Suitable for electronics/electrical engineering laboratories for testing, measurement, soldering, and signal analysis.
•Mobile workstation mounted on wheels with locking mechanism.
•MCB protection on AC input supply for electrical safety.
•All instruments internally wired and front-mounted for safe, ergonomic operation.
•Proper grounding of all instruments.
•Design ensures durability, safety, and ease of use in academic labs.
2.Mechanical Structure
•Material: CRC steel pipes, 38×38×1.5 mm, powder-coated.
•Dimensions: W ≥ 1200 mm, D ≥ 750 mm, H ≥ 1150 mm.
•Table Top: 19 mm plywood, laminated with 1.8 mm off-white mica.
•Antistatic Protection: 2 mm antistatic mat covering entire work area.
•Drawers: 3 MS drawers (275×375×100 mm, 1.2 mm sheet), each with lock and handle.
•Panel Structure: Raised back panel, total height 1200 mm, depth 500 mm, side supports for rigidity.
•Socket Strip: MS panel strip with electrical sockets/switches for external use.
3.Electrical Specifications & Safety
Input Supply: 230 V AC, 50 Hz.
Protection: Two-pole MCB, 16 A, Havells/Siemens or equivalent.
Internal Wiring: Copper wires, properly terminated, labelled, routed in ducts/sleeves.
Integrated Instrumentation
A.Function / Pulse Generator
•Bandwidth: 10 MHz max.
•Minimum Frequency: ≤ 1 µHz.
•Waveforms: Sine, Square, Triangle, Ramp, Pulse, Noise, DC.
•Arbitrary Waveforms: Sinc, Staircase, Staircase Up/Down.
•Amplitude Range: ~2 mVpp to 12 Vpp into 50 Ω.
•Impedance: 50 Ω.
•Accuracy: ~1 mVpp.
•Modulation: AM, FM, PM, FSK, PWM, Sweep & Burst (built-in).
•DC Offset: ± 6.25 V, accuracy ~2 mV.
•Support Lifecycle: Free firmware/software updates during warranty; nominal cost during AMC.
B.Digital Storage Oscilloscope (DSO) with Component Tester
•Bandwidth: DC to 50 MHz or better.
•Channels: ≥ 4.
•Sample Rate: ≥ 1 GSa/s.
•Memory Depth: ≥ 24 Mpts.
•Vertical Scale: 1 mV/div – 10 V/div.
•Time Base: 5 ns/div – 50 s/div.
•Math Functions: A+B, A–B, A×B, A/B, FFT, logic ops, integration, differentiation, log/exp, filters.
•Trigger Types: Edge, Pulse Width, Runt, Window, Nth Edge, Slope, Video, Pattern, Delay, Timeout, Duration, Setup/Hold, RS232/UART, I2C, SPI.
•Bus Decoding: I2C, SPI, UART/RS232.
•Measurements: ≥ 33 automatic functions.
•Display: ≥ 7-inch color.
•Waveform Update Rate: ≥ 30,000 wfms/s.
•Recording: Real-time, up to 60,000 frames.
•Interfaces: USB 2.0 (Host & Device), LAN.
•Component Tester: Short/open circuit, diode polarity, transistor comparative testing.
C.Dual Tracking DC Power Supply
•Main Output: 0 to ±30 V, 0–2 A, CV/CC modes.
•Auxiliary Output: 5 V, 2 A fixed.
•Resolution: Voltage 100 mV, Current 10 mA.
•Regulation: Load ±(0.05%+10 mV), Line ±(0.05%+10 mV).
•Ripple & Noise: ≤ 1 mVrms (0–30 V), ≤ 5 mVrms (5 V).
•Transient Response: ≤ 50 µs (±30 V), ≤ 100 µs (5 V).
•Display: 3-digit digital for V/I, switchable.
•Protection: Overload, over-voltage, over-temperature, short-circuit.
•Dimensions: 285×410×88 mm, ~4.75 kg.
D. Soldering / Desoldering Station
•Soldering: 60 W, 170–270 V input, 180–480 °C range.
•Desoldering: 70 W, diaphragm pump, 170–270 V input, 180–480 °C range.
E. Digital Multimeter
•Functions:
•DC Voltage: 0.1 mV – 1000 V
•AC Voltage: 0.1 mV – 750 V
•DC/AC Current: 0.1 µA – 20 A
•Resistance: 0.1 Ω – 40 MΩ
•Capacitance: 10 pF – 200 µF
•Frequency: 0.1 Hz – 30 MHz
•Temperature: −40 °C – 1000 °C
•Transistor hFE: up to 1000
•Diode test, continuity buzzer (<30 Ω).
•Features: Auto/manual ranging, data hold, max/min hold, low battery indication.
•Safety: Overload protection, 10 MΩ input impedance.
•Power: 3 V (AAA batteries).
Share
